Kitchen & Bathroom Paint

£86.40 inc vat.
In stock


Quick overview

Pack Size: 5l.
Finish: Mid-Sheen.
Coverage: 10 m²/l.
Touch dry: 2 hours.
Recoat time: 4 hours.
Water based, 24 colours available.

Kitchen and Bathroom paint has been specifically formulated to provide premium protection against mould and bacteria growth typically found in kitchen and bathrooms areas and provide high thermal insulation.

Combined with our world-leading insulating technology, this hard-wearing bathroom paint emulsion also reduces heat loss through walls and ceilings.

Painting and decorating has never been easier with this all-rounder Eco-friendly, washable kitchen paint that dries to a subtle mid-sheen finish that resists moisture, stains and grease.


  • Heat loss reducing insulating paint.
  • Reduces severe condensation problems.
  • Durable anti mould paint.
  • Greece resistant.
  • Provided thermal insulation reduces heating bills.
  • Can be used as wall paint as well as ceiling paint.
  • Helps prevent unsightly toxic mould.
  • Lowest cost wall & ceiling thermal insulation.
  • Water based acrylic paint, therefore eco friendly.
  • Easy to use for all painters and decorators.

Technical Details:

  • Application method: Brush, Roller, Spray.
  • Coverage: up to 3.5 m² per litre with the recommended minimum of two coats.
  • A 5L tub will cover up to 17 m² with 2 coats.
  • If spray painting - filters MUST be removed and nozzle size increased to between 0.019X to 0.026X.
  • Can wallpaper over, it will continue to provide thermal insulation to reduce the heat lost through the walls and ceilings by reflecting the heat BACK in to the room/building.
  • Can be painted on top of lining paper, wallpaper already painted with another emulsion and non-blown vinyl wallpapers.
  • should not be applied to “blown vinyl” wallpapers which absorb the paint and leave the insulating micro technology as a residue which will later become dispersed.
  • Painting new plaster requires a mist coat application, a coating that is one part paint and one part water, only then the rest of the insulating paint can be applied.

Surface Preparation:

Ensure surfaces are clean and dry before painting, with all loose and defective paint / paper removed.
If necessary, wash surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Surfaces that remain powdery after thorough preparation will need to be treated with appropriate plaster sealer or primer. All surface defect should be filled with appropriate wall / plaster filler.

Delivery time: 1-3 Business Days.

How do you rate this product?

  1 star 2 stars 3 stars 4 stars 5 stars

Write your own review

Related Products
Please wait...